Start free
← All guides

Vectorize Kit: turn any logo into an accurate vector, then every version and its colors

Vectorize Kit (/tools/vectorize-kit) is aiKit's logo vectorizer. It was called Logo Kit until October 25, 2026; old /tools/logo-kit links, including links to one logo, open it. It turns whatever logo file you have, even a blurry JPG or a phone photo of a sign, shirt, or business card, into an accurate vector traced from your own file, shows how close it is, and downloads it as SVG, EPS, PDF or PNG in one click. Then, if you need them: a set of ready versions, the exact brand colors, an honest read on how it will print by screen printing, embroidery, laser engraving, and more, a brand sheet, and Put it on a product in Mockup Studio. Vectorize Kit is open to every signed-in account; someone who isn't signed in gets a page-not-found. Everything below describes what is built today.

Open Vectorize Kit →
1

Rate each version: thumbs up or thumbs down

Under Print readiness, the current version asks How did version 2 turn out? with a thumbs up and a thumbs down. Thumbs up marks it as good. Thumbs down opens What went wrong? Pick any of: Didn't do what I asked, Changed something I didn't ask for, Something is missing, Wrong text or spelling, Wrong colors, Looks poor or low quality, File, size or bleed problem, or Something else (which asks for a few words). Tell us more is optional, with a microphone.

Send and fix it sends the report and asks Vectorize Kit for the next version made from it, the same as a request in Fix any area, in plain words. If part of it can't be done, it says so first. Just send it only reports. Afterward the box says what you reported, and Change lets you change your answer; a thumbs up later takes the report back.

Every thumbs down reaches the aiKit team right away, and the job goes into a test bank that is rechecked after updates, so the same mistake can't quietly come back. Your files are used only for that check.

2

Dropping in a logo

The page opens on Vectorize your logo: one line on what you get (SVG, EPS, PDF and see-through PNG; your shapes, never redrawn; fix any area in plain words) and one box, Drop in any logo. Drag files onto it, or press Choose files. PNG, JPG, HEIC, WebP, GIF, BMP, TIFF, PSD, SVG, PDF, AI, and EPS are accepted, up to 20 files at once and up to 60 MB each. On a phone (or any touch screen) a second button, Take a photo, opens the camera so you can photograph a logo on a sign, a shirt, or a card. Nothing starts yet: the files you pick show under Ready to vectorize (1 logo, or the number you picked), each with a small picture (a file type such as PDF or EPS shows its type instead), its name and size, and an × to remove it. Add more picks more files, up to 20, and Clear all empties the list. Under the files, Anything we should know? (optional) takes a note in your own words, typed or spoken, such as "keep the feather soft" or "3 colors only"; it goes with every file in the list, and example buttons add Keep painted parts soft, 3 colors only, Make it one color and Remove the tagline. Press Vectorize (or Vectorize 3 logos) to start. If a logo stops for a reason on our side, the message under the title also says whether your file's type is supported, so you know if the type is the problem.

Your file goes straight from your browser to the logo engine, so large originals are sent whole; nothing is shrunk first. A file over 60 MB is stopped before it uploads, with a note to save a smaller copy or export a PNG or PDF. If a file doesn't finish uploading (the connection drops, or the tab closes), that logo stops and is not counted, and you can drop it in again.

Under the drop box, Add changes to make after the trace (optional) opens Anything to change?, which takes instructions in your own words, typed or spoken with the microphone, before you add the file: for example "make it one color navy and remove the tagline". Example buttons add common requests to the box: Make it one color, Remove the tagline, Make a stacked version, and Match these colors (type your color names or HEX codes after it). The instructions go with every file in that upload, and the box clears once the files are sent. When instructions are typed, the drop box says the changes are made after the kit, as version 2. While a logo is open, the box folds to one link, Add instructions for the next logo, because Fix any area, in plain words is where you change the logo on screen.

Your logo is always made from your own file first, as version 1; it is never redrawn or replaced with a different logo. Then your instructions run as the first change, the same way Fix any area, in plain words works, and make version 2. While it works, the step list ends with Following your instructions and shows the words you typed. When it finishes, a note at the top of the logo says Your instructions made version 2, lists what was done, and lists anything that wasn't done under Not done, with See version 1 to compare (and Back to version 2). If nothing in the instructions can be done, the note says Your instructions weren't applied, says why in plain words, and version 1 stays on screen. Either way you can ask again in other words under Fix any area, in plain words.

Several logos at once each get their own result. After Vectorize, a This upload list shows one row per logo: its picture, its name, what it's doing now (the step it's on while it works, then its match score), and a status: Working, Ready, Needs you or Stopped. The top line counts how many are done (2 of 3 done, then All 3 done). Press a row to open that logo's result below the list (the open one says Showing below); each row is a real link, so it can be opened in a new tab. The list stays while you go between them.

Once a logo is open the box gets smaller and reads Drop in another logo, so you can keep adding while the first one works. With no logo open, the full Vectorize your logo box is always at the top, above Your logos.

3

While it works: the step list

Each logo shows Cleaning up (its name) with the step it's on, a progress bar, a clock with the time so far, and the full list of steps, each marked done, working now, or next. It usually takes about a minute.

If it stops, the card says where it stopped and why in plain words, confirms No use was counted for this file, lists the steps that finished, and offers Drop in another file. A blurry photo or a tiny image is the usual cause; a sharper photo or the original file works best.

4

Soft, painted parts (a watercolor feather, a brush wash)

Some logos mix flat art with a soft, painted part: a watercolor feather beside crisp words, a brush wash behind a name. Tracing turns flat color into shapes, but a painted part has no flat color, and it used to come back as a thin outline of its darkest edge. Now Vectorize Kit finds a painted part the vector would lose, and keeps it looking like your upload.

When that happens, a card above the before and after says, for example, We kept the painted part on the right looking like your upload, and offers two choices. Keep it looking the same (recommended) is picked first: the painted part is kept as your upload's own pixels, placed as a picture inside your SVG, PDF and EPS files, while everything else, like your text, stays true vector. Flat vector only draws the painted part as a few filled tone shapes instead, so every part of the file is vector shapes (for cutting, engraving or one-color printing); its soft texture is simplified. Each choice makes a new version, so you can compare and switch back.

The one-color, black and white versions show the painted part as a soft silhouette in that color. You can also ask in Fix any area, in plain words, for example "keep the feather filled and soft like the original" or "make the feather vector only"; on a logo made before this was added, that request finds the painted part from your upload and fixes it. If no painted part is found, the change says so under Not done yet instead of pretending.

5

Your logos: every logo you've made

With no logo open, the page lists every logo you've made under Your logos, newest first, so nothing is lost when you close the page. Each row shows a small picture of the logo, its name (press it to open the logo with all its versions and its full version history), the file it came from, the version on screen, how many ready versions it has, the match score, the day you made it, its brand colors as small dots, and its status: Ready, Needs you (with the reason, for example a print method that needs a fix), Working…, or Stopped. A logo saved to a brand kit also shows a Brand kit tag that opens that kit.

Across the top, five counts are also filters: Ready, Needs you, Working, Stopped, and In a brand kit. Press one to show only those logos; press it again to show all. Below them: a search box (a logo's name or its file name), a date filter (Any time, Last 7 days, Last 30 days, Last 12 months), and a sort (Newest first, Oldest first, Name A–Z). Whenever a filter is on, a Showing line says what you're looking at, with Show all to clear it. Every filter is part of the page address, so you can bookmark or share a view.

Every logo has its own address: /tools/vectorize-kit?job=… (or the shorter /tools/vectorize-kit/…). An open logo has a Your logos button at the top to go back to the list, and the browser's back button works too. Brand kits, at the top right of the page, opens your saved brands.

6

Brand kits: your saved brands (now in Brand Kit)

Since October 21, 2026, Save to brand kit puts the logo into the one Brand Kit: a Brand Kit named after the logo is made the first time (saving again updates it), and its Look holds the logo versions and colors. Saved shows Open it in Brand Kit. The old Brand kits page (/tools/vectorize-kit/brand-kits) now opens Brand Kit, where the kit's voice, reference emails and liked looks can be added too.

Each Brand Kit made this way can be renamed, given a voice, and deleted in Brand Kit. Deleting a Brand Kit leaves the logo and all its versions under Your logos.

7

Several logos at once

Choose more than one file, check them under Ready to vectorize, and press Vectorize (for example Vectorize 3 logos). Every logo runs as its own job with its own result. The This upload list shows one row per logo with its picture, its name, the step it's on or its match score, and its status: Working, Stopped, Needs you, or Ready; the top line counts how many are done and how many need a look. Press a row to show that logo below the list (that row says Showing below). The open logo is part of the page address (?job=…), so you can bookmark it or come back to it later from the same account.

8

The header: match score and downloads

At the top of a finished logo: the clean logo, its name, and a match score (for example 96% match) with one plain sentence on what it means. The score is measured against the picture you uploaded (straightened when it was a photo), not against a cleaned-up copy, so a clean-up that dropped part of the picture shows up as a lower score. A check mark means 90% or better; below that an eye icon asks you to open Show differences and fix that area in words. For a real vector file the sentence says its shapes were kept exactly, and for a photo that is not a logo it says only part of the picture could become flat shapes. Under it: the version you're looking at and the original file name. If the logo needs your attention for printing, a line names the method and the issue in plain words (for example Embroidery: the thinnest lines are too thin to stitch at the usual size) and links to See the change, which opens that method's steps.

Download all (ZIP) downloads every version in every format in one file. Brand sheet (when there is one) opens a one-page PDF: the logo on light and dark, every version, the color values, the clear-space rule, and the smallest size for each print method. Save to brand kit keeps this logo's current version, colors, and version list in your brand kits; saving again later updates it. Once it's saved, a line under the header links to Brand kits. Save to Graphics opens a panel just under the header: tick the versions to keep (Full color, One color black, and One color white are ticked to start; Pick all and Clear help), choose a client from your Graphics library if you like, and press Save. Each version goes into the Graphics library as its vector (SVG) file, under the category Logos, in a folder named Logos/<logo name>, tagged with the version's name and number. A line shows each one as it saves; when they're done, a green note links each saved version to its place in Graphics (/home/graphics?asset=…), where Mockup Studio, Content Kit, and Customer Proofs can use it. If one doesn't save, a red note says which one and why, and the others still save. More holds Send to Printer’s Helper (opens Printer’s Helper and downloads the logo's print PDF to drop in there) and Put it on a product, which opens Mockup Studio with this logo on the open product. On a phone, Save to Graphics, Brand sheet, and Save to brand kit move into More, and once you scroll past the header a bar at the bottom keeps the downloads in reach: Save picture saves the full color logo as a PNG, which any phone opens, and ZIP beside it downloads every file. On an iPhone or iPad, every Vectorize Kit download opens the share sheet once the file is ready and checked: Save Image puts a picture in Photos, and Save to Files keeps any file (a ZIP opens in the Files app, where tapping it unpacks it). SVG and EPS files are for design apps and printers; a phone's Photos app doesn't open them, so use PNG there. WhatsApp can't send SVG files, so when you share an SVG the sheet carries a PNG picture of it on a white background instead: WhatsApp sends the picture. To keep the SVG file itself, press Download and choose Save to Files. WhatsApp can't send EPS files either: after you share one, a tip says to choose Save to Files and attach it in WhatsApp as a Document.

9

Before and after

Drag the handle (or use the arrow keys) to slide between Your upload on the left and Clean vector on the right. Your upload is the picture as you sent it (straightened and cropped when it was a photo of a sign or card), background included. Zoom (Fit, 2x, 4x) above the picture enlarges both sides; move the pointer over the picture to look around, which is the quickest way to check small text and edges. For a PDF, AI, EPS, or SVG file, Your upload is your file exactly as it draws, so the match score and the differences compare the clean vector with the real file. Show differences lays colored marks over the vector side wherever it differs from your original; few marks means a close match. Side by side shows Your upload and the Clean vector next to each other, each one whole, so you can look at the full logo; press it again to go back to the slider. Long file names wrap inside the page instead of pushing it sideways.

10

Download your vector

Under Before and after, Download your vector has four buttons for the full-color version on screen: SVG (any size, any app), EPS (what sign and print shops often ask for), PDF (vector, for printers) and PNG (see-through background). Each downloads in one click and is named after the logo. A later version (after a change) downloads the same way. Download all (ZIP) in the header still holds every version in every format.

11

Next, if you need it

Under the downloads, Next, if you need it has two cards: Put it on a product opens Mockup Studio with this logo already placed on the open product, and Brand sheet opens the one-page PDF. Under them, Jump to scrolls to Every version, Exact colors and Print readiness further down the page. Put it on a product is also in the header's More menu, and Save to Graphics is in the header.

12

Blurry pictures, photos, and real vector files

Every upload is checked before it is traced. A blurry or enlarged picture gets smoothed outlines, and colors that are only JPEG noise or a blur between an ink and the page are folded back into the logo's real inks, so a blurry two-color logo comes back as two colors. A photo of a sign, card or shirt is straightened and cropped to the logo first. When the logo sits on a bigger picture (a busy photo, a screenshot with an app window around it, or a document page with text), only the logo is cut out and traced. A blurry, tiny or heavily compressed picture is smoothed and sharpened before tracing, and a scan or fax with speckles is cleaned and levelled. Drop shadows and white glows around the art are taken out by default, so only the logo is left. When a line of text is too small in your file to trace exactly (under about 8 px tall), the notes say so and suggest retyping it or sending a larger copy.

A picture that is a photo, not a logo (a street, a landscape, people), is called out at the top in a yellow note, This looks like a photo, not a logo, with a match score kept low and the logo marked Needs you. When a photo has no flat art at all, the upload stops with that message and is not counted. A real vector file (SVG, PDF, AI, EPS with real paths) keeps its own shapes exactly; nothing is traced again.

13

Nothing from your file is left out

Every logo is checked part by part against your original before it's shown: the original and the clean vector are drawn at the same size, and any part of the art the vector is missing (a word in a ring of text, a small symbol) is found and rebuilt from your file's own art, never retyped or redrawn. Words and shapes filled with a color blend (a gradient) are kept with their blend in the full-color version, its SVG, PDF, and PNG files; the one-color, black, and white versions make them one flat color like everything else.

If a part had to be rebuilt, What the clean-up noticed says where (for example, Part of the art at the bottom left didn't convert on the first pass. It was rebuilt from your file's own pixels there; check it). If a part still couldn't be rebuilt, the logo is marked Needs you with where it is, and you can ask Fix any area, in plain words to put it back.

Nothing missing check: every finished vector is compared with your upload on one grid, thin lines and small marks included. If something was dropped or came out a different color (for example a thin black line that came out gray), a yellow note at the top says so in plain words (Checked against your file: a thin line at the bottom came out gray instead of black) and the fix starts on its own as version 2, from your file's own shapes. Keep it keeps the new version; Back to version 1 undoes it. After any later change, the new version is checked against the one before, and art the change dropped without being asked is listed under Not done yet.

14

Fix any area, in plain words

Type a change the way you'd ask a designer ("use our green #2E7D32 instead", "put the icon on the left") and press Make the change, or press Enter. The changes it makes: recolor a color, swap two colors, one color, remove the icon, name, or tagline, thicker lines, stacked or side-by-side layouts, and putting back art from your file that is missing from the logo ("some text at the bottom left disappeared"). Missing art comes back from your file itself, never retyped or redrawn: aiKit measures exactly what is missing (a thin line, words, a mark) and where, adds it back, and checks the new version against your file again. If the logo's own shapes can't rebuild it, you're offered a redraw with AI with its token cost shown first; if nothing is missing, it says what it compared. Example buttons under the box fill it for you: changes for this logo's own colors, Make it ready for a print method that needs work, Put back anything missing from my file, Change the background to, Make it one color, Remove the tagline, and White version for dark shirts.

When part of a request isn't one of these changes, the rest is still made, and the note says so first: Version N made, but not everything you asked for was done, then each part under Not done, with why, then what was done. That version is marked Needs you, never Ready, until you change it again or go back. When none of it can be done, nothing changes, the reason shows under the box, and nothing is counted. Each change in words uses a small amount of your plan's tokens; Fix it, Undo, and Restore use none.

While a change is being made, the box empties and a panel under it shows your words, the version it will become (Making version 2), and a clock; the button says Making the change. The moment the new proof is in, the button is ready again and the note marks it: Version 2, updated just now, what you asked, and What changed. Before and after shows a Version 2 · new badge and See version 1, and briefly outlines in green.

Every change makes a new version. A note says which version is showing, lists what changed, and has Back to version N. Every preview on the page, from Before and after to the colors, switches to the new version. Undo last change goes back one version. Version history lists every version newest first (Automatic clean-up, You asked, Fix, or Restored, with when), marks the one Showing, and has Restore on the others. Undo and Restore are free and use no tokens.

15

The circle or box behind your logo

Many logos sit on a solid circle or box, like a crest on a black disc. When that shape is black, white, or gray and the art on it has its own colors, Vectorize Kit takes it out so only the art is left and the logo works on any background. A card at the top says so (We took the black circle out from behind your logo) with Put the circle back, which makes a new version with the shape back exactly as it was in your file.

When the shape is a color (often it's part of the logo, like a blue badge), it's kept and the card asks: Take the circle out, or Keep it. Either answer is one click and makes a new version; nothing is counted. With the shape kept, the one-color versions are the shape in that ink with the art cut out of it, so the art still shows.

Every color in your file is kept exactly as it is, even two close shades of the same color, like a dark blue and a lighter blue.

16

Get it ready for how you'll use it: print methods, step by step

One card per method: Screen printing, Embroidery, Laser engraving, Pad printing, Cut vinyl, DTF transfers, and Screens and web. Each card shows a light (Ready, Check first, or Needs a change) and the issue in plain words, for example "The thinnest lines are too thin to stitch at the usual size." Methods that need attention are listed first.

Press a card to open that method's own steps, right under the cards (the address gets ?method=embroidery, so a link opens it). Step 1, What needs to change, appears only when something does: the issue, why it matters for that method ("Thread is about 1 mm wide, so lines thinner than that can't be stitched"), and a button that makes the change as a new version you can undo, such as Make lines thicker and drop tiny bits, Leave off the small text, Make it one color, or Use the one-color black version.

A few details: only the questions that change the files, each with buttons to tap and Other to type your own. Screen printing: garment color, how many ink colors, print width. Embroidery: stitched width, placement, fabric color, how many thread colors, and whether the background is filled with stitches. Laser engraving: material, whether the logo or everything around it is engraved, mirroring for the back of clear acrylic or glass, and width. Pad printing: the item, ink colors, width. Cut vinyl: decal width and one sheet per color or one color. DTF transfers: garment color, white underbase (Automatic, Yes, No), width. Screens and web: the background behind the logo.

Your files: press the method's button (Make the films, Make the digitizer files, Make the laser file, Make the plates, Make the cut paths, Make the print file, Make the icons). A panel shows it working with a clock; it takes a few seconds and uses no tokens. Then you get a preview, a short list of what was made, Download all (ZIP) and each file on its own. Change an answer and the files are marked as from your earlier answers until you make them again.

What each method makes. Screen printing: a PDF whose first page is your whole logo in color, marked as the reference and not a film, then one film per ink color, black on clear, at your exact width with registration marks on all four sides and a label with the color, its closest spot color, and print order (light colors first), each page saying it is one ink of the design and not the whole logo; a white underbase film for dark garments; white parts of the logo stay the shirt color on a light garment. Pad printing: the same whole-logo page and labeled plate films, sized for your item. Embroidery: stitch-ready art (SVG, PDF and a 300 dpi PNG) at your size with every line at least 1 mm, the thread colors with their closest spot color, an estimated stitch count range, and a one-page digitizer sheet; send it to your digitizer for the DST or PES stitch file (making stitch files right in aiKit comes later). Laser engraving: a one-tone vector where black is what the laser marks, reversed or mirrored if you asked. Cut vinyl: a red hairline cut path per vinyl color and a proof that circles pieces too small to weed. DTF transfers: a transparent 300 dpi print file at your size and a white underbase file for dark garments. Screens and web: favicons (16, 32, 48 and .ico), app icons (180, 192, 512), social avatars (400, 1080), a 1200 x 630 link preview, an email signature size and the SVG.

Under the cards, the smallest width that stays clear is a common shop starting point; your printer may set different limits. Colors are matched to the closest spot color by eye; confirm with a printed swatch.

17

Versions

Your logo, ready for every use shows the main versions: Full color, Black, White (for dark backgrounds), and One color in each brand color. Each one says under it what it's for (for example: All white. For dark backgrounds, photos, dark shirts and signs). More versions opens the extras: Grayscale, Reversed on brand color, a Small-size version, and any extra layouts the logo allows. The round button in a version's corner switches between a light and a dark backdrop. Plain, Shirt, Mug, and Sign show it on a simple drawing of that product. The download button on each version offers SVG (vector, for design apps), PDF (vector, for printers), and PNG (picture, opens on any phone). All of them are in the ZIP.

Every version is made from the art itself. Where two colors touch (a light chevron on a dark shield), the one-color versions keep a thin line between them, so the shape still reads in one ink. Black is not offered twice (One color: Black would be the same as Black). A version that would come out as a plain shape with no logo showing is left out, and What the clean-up noticed says which.

A version's name is a link: pressing it highlights that version and puts it in the page address (?version=…), so the link opens straight to it.

18

Colors

Each brand color shows its HEX, RGB, and CMYK values; press any value to copy it. Under them: the closest spot color match (approximate, from an open reference table; check a printed swatch before matching), and how readable the color is on white and on black, with the contrast ratio. Copy all copies every color's values as text. What the clean-up noticed, at the bottom, lists anything the engine flagged about the file.

19

How tokens are used

Vectorize Kit uses your account's tokens, the same tokens every aiKit AI tool uses. There is no monthly logo count. A logo uses a small, set amount once its clean-up finishes. A logo that stops, or whose file never arrives, uses none. Each change in words uses a small amount; Fix it, undo, and restore use none.

Next guide Mockup Studio: your logo on real-looking products, in every color

Have a quicker, specific question instead? Check the FAQ.